Saturday 28 March 2015
**** New CT Tutorial for Amy Marie - Bohemian Sapna ****


Now for the Tutorial

This tutorial is written with the assumption that you have working knowledge of PSP.
It was written by Dance In The Rain on 28th March 2015 & is intended for educational purposes only.

Supplies:
Scrap Kit: Bohemian Sapna by Amy Marie's Kits found HERE
Tube: Sapna by Designs By Norella found HERE
Font of Choice - I used Jane Austen
Mask: Number17 by Millie's PSP Madness found HERE

♥ Lets get started ♥
For the Drop Shadow on everything except the tube I am using the following settings:
Vertical: 1
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)

Remember to save everything as you go along in order not to lose it in case of a crash.

DNR means Do Not Resize.
C&P means Copy & Paste.
DS means Drop Shadow.

I am using the following elements frames & Papers:
* Paper 2 - DNR
* Element 16 - Resized to 150%
* Element 60 - Resized to 120%
* Element 62 - Resized to 125%
* Element 61 - DNR
* Element 75 - DNR
* Element 98 - Resized to 65%
* Element 15 - DNR
* Element 110 - Resized to 135%
* Element 18 - Resized to 50%
* Element 100 - Resized to 40%

You can look back at my image for placement of elements.

Open Paper 2 (DNR)
Open Mask in a different window (DNR)
Click on Paper 2 window and go to Layers, New Layer Group, Click ok.
Click on Layers again & New Mask Layer, From Image.
In the source window click on the Mask Layer. Click ok.

C&P Element 16 on to your mask layer.
Resize to 120%. Apply Drop Shadow & Position.

C&P Element 62 on to your image.
Resize to 125%. Position. Apply Drop Shadow.

Duplicate Element 62 - Mirror - No need to add extra Drop Shadow.

C&P Element 61 on to your image.
DNR. Position & apply Drop Shadow.

Duplicate Element 61 - Mirror - Rotate to liking - No need to add extra Drop Shadow.

C&P Element 75 on to your image.
DNR. Position & NO Drop Shadow.

C&P Element 98 on to your image.
Resize to 65%. Position & NO Drop Shadow.

C&P Element 15 on to your image.
DNR. Position & apply Drop Shadow.

C&P Element 110 on to your image.
Resize to 135%. Position & apply Drop Shadow.

C&P Element 18 on to your image.
Resize to 50%. Position & apply Drop Shadow.

C&P Element 100 on to your image.
Resize to 40%. Position & apply Drop Shadow.

C&P your Tube on to your image.
DNR. Position & NO Drop Shadow.
Reduce Opacity to 70%

C&P your Tube on to your image again.
Resize to 20%. Position & Apply Drop Shadow.

Use the following Drop Shadow Settings for the tube & name:

Vertical: 2
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)

We are almost done now.
Add your name. I used font size 18 and color White with an outline color Brown.
I have also applied a Drop Shadow using the TUBE settings.

Add your copyright info, License number & Merge Visible.

Save & you're done. Simply & Easy.

I would love to see what you make using my tutorial.
Thank you for following my Tutorial & I hope you enjoyed it.
If you have any questions please feel free to email me at danceintherain1990@gmail.com
**** New CT Tutorial for Inzpired Creationz Store - Inzpired Creationz Kit, Midnight Atlantis & Alehandra Vanhek Tube, Queen Of The Ocean ****


Now for the Tutorial

This tutorial is written with the assumption that you have working knowledge of PSP.
It was written by Dance In The Rain on 28th March 2015 & is intended for educational purposes only.

Supplies:
Scrap Kit: Midnight Atlantis by Inzpired Creationz found HERE
Tube: Queen Of The Ocean by Alexandra Vanhek found HERE
Font of Choice - I used Segoe Script.
Mask: Number 6 by Millie's PSP Madness found HERE

♥ Lets get started ♥
For the Drop Shadow on everything except the tube I am using the following settings:
Vertical: 1
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)

Remember to save everything as you go along in order not to lose it in case of a crash.

DNR means Do Not Resize.
C&P means Copy & Paste.
DS means Drop Shadow.

I am using the following elements frames & Papers:
* Paper 1 - DNR
* Frame 1 - DNR
* Water 2 - DNR
* Sand 1 - Resized to 115%
* Sand 3 - DNR
* Plant 3 - DNR
* Plant 1 - Resized to 85%
* Seaweed - Resized to 85%
* Bubbles 1 - DNR
* Treasure Chest - Resized to 65%
* Starfish 1 - DNR
* Palm Trees 1 - DNR

You can look back at my image for placement of elements.

Open Paper 1 (DNR)
Open Mask in a different window (DNR)
Click on Paper 1 window and go to Layers, New Layer Group, Click ok.
Click on Layers again & New Mask Layer, From Image.
In the source window click on the Mask Layer. Click ok.

C&P Frame 1 on to your mask layer.
DNR. Apply Drop Shadow & Position.

C&P Water 2 on to your image.
DNR. Position. NO Drop Shadow.

C&P Sand 1 on to your image.
Resize to 115%. Position & apply Drop Shadow.

C&P Sand 3 on to your image.
DNR. Position & NO Drop Shadow.

C&P Plant 3 on to your image.
DNR. Position & apply Drop Shadow.

C&P Plant 1 on to your image.
Resize to 85%. Position & apply Drop Shadow.

C&P Seaweed on to your image.
Resized to 85%. Position & apply Drop Shadow. 

C&P Bubbles 1 on to your image.
DNR. Position & NO Drop Shadow.

Duplicate Bubbles 1 - Mirror - No need to add extra Drop Shadow.

C&P Treasure Chest on to your image.
Resized to 65%. Position & apply Drop Shadow.

C&P Starfish 1 on to your image.
DNR. Position & apply Drop Shadow.

C&P Palm Trees 1 on to your image.
DNR. Position & apply Drop Shadow.

C&P your Tube on to your image.
Resize to 20%. Position & Apply Drop Shadow.

Use the following Drop Shadow Settings for the tube & name:

Vertical: 3
Horizontal: 3
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)

We are almost done now.
Add your name. I used font size 20 and color Gold with an outline color Black.
I have also applied a Drop Shadow using the TUBE settings.

Add your copyright info, License number & Merge Visible.

Save & you're done. Simply & Easy.

I would love to see what you make using my tutorial.
Thank you for following my Tutorial & I hope you enjoyed it.
If you have any questions please feel free to email me at danceintherain1990@gmail.com
**** New CT Tutorial for Amy Marie - Lil Easter Girl ****


Now for the Tutorial

This tutorial is written with the assumption that you have working knowledge of PSP.
It was written by Dance In The Rain on 28th March 2015 & is intended for educational purposes only.

Supplies:
Scrap Kit: Lil Easter Girl by Amy Marie's Kits found HERE
Tube: Included in the Kit & is by Lady Mishka.
Font of Choice - I used Bend 2 Square
Mask: Number 77 by Signature Collections found HERE

♥ Lets get started ♥
For the Drop Shadow on everything except the tube I am using the following settings:
Vertical: 1
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)

Remember to save everything as you go along in order not to lose it in case of a crash.

DNR means Do Not Resize.
C&P means Copy & Paste.
DS means Drop Shadow.

I am using the following elements frames & Papers:
* Paper 18 - DNR
* Element 64 - Resized to 125%
* Element 70 - Resized to 125%
* Element 74 - Resized to 120%
* Element 26 - Resized to 125%
* Element 76 - Resized to 125%
* Element 47 - DNR
* Element 68 - DNR
* Element 67 - DNR
* Element 86 - DNR
* Element 12 - DNR
* Element 84 - Resized to 65%
* Element 4 (Tube) - Resized to 115%

You can look back at my image for placement of elements.

Open Paper 18 (DNR)
Open Mask in a different window (DNR)
Click on Paper 18 window and go to Layers, New Layer Group, Click ok.
Click on Layers again & New Mask Layer, From Image.
In the source window click on the Mask Layer. Click ok.

C&P Element 64 on to your mask layer.
Resize to 125%. Apply Drop Shadow & Position.

C&P Element 70 on to your image.
Resize to 125%. Position. NO Drop Shadow.

C&P Element 74 on to your image.
Resize to 120%. Position & apply Drop Shadow.

C&P Element 26 on to your image.
Resize to 125%. Position & apply Drop Shadow.

C&P Element 76 on to your image.
Resize to 125%. Position & apply Drop Shadow.

C&P Element 47 on to your image.
DNR. Position & apply Drop Shadow.

C&P Element 68 on to your image.
DNR. Position & apply Drop Shadow.

C&P Element 67 on to your image.
DNR. Position & apply Drop Shadow.

C&P Element 86 on to your image.
DNR. Position & apply Drop Shadow.

C&P Element 12 on to your image.
DNR. Position & apply Drop Shadow.

C&P Element 84 on to your image.
Resize to 65%. Position & apply Drop Shadow.

C&P Element 4 (Tube) on to your image.
Resize to 115%. Position & apply Drop Shadow.

Use the following Drop Shadow Settings for the tube & name:

Vertical: 2
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)

We are almost done now.
Add your name. I used font size 26 and color White with an outline color Purple.
I have also applied a Drop Shadow using the TUBE settings.

Add your copyright info, License number & Merge Visible.

Save & you're done. Simply & Easy.

I would love to see what you make using my tutorial.
Thank you for following my Tutorial & I hope you enjoyed it.
If you have any questions please feel free to email me at danceintherain1990@gmail.com
**** New CT Tutorial for Amy Marie - Zira ****


Now for the Tutorial

This tutorial is written with the assumption that you have working knowledge of PSP.
It was written by Dance In The Rain on 28th March 2015 & is intended for educational purposes only.

Supplies:
Scrap Kit: Zira by Amy Marie's Kits found HERE
Tube: Zira by Designs By Norella found HERE
Font of Choice - I used Abbey Line
Mask: Number 52 by Millie's PSP Madness found HERE

♥ Lets get started ♥
For the Drop Shadow on everything except the tube I am using the following settings:
Vertical: 1
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)

Remember to save everything as you go along in order not to lose it in case of a crash.

DNR means Do Not Resize.
C&P means Copy & Paste.
DS means Drop Shadow.

I am using the following elements frames & Papers:
* Paper 8 - DNR
* Element 51 - Resized to 115%
* Element 83 - Resized to 85%
* Element 81 - DNR
* Element 67 - Resized to 50%
* Element 88 - Resized to 65%

You can look back at my image for placement of elements.

Open Paper 8 (DNR)
Open Mask in a different window (DNR)
Click on Paper 8 window and go to Layers, New Layer Group, Click ok.
Click on Layers again & New Mask Layer, From Image.
In the source window click on the Mask Layer. Click ok.

C&P Element 51 on to your mask layer.
Resize to 115%. Apply Drop Shadow & Position.

C&P Element 83 on to your image.
Resize to 85%. Position. Apply Drop Shadow.

C&P Element 81 on to your image.
DNR. Position & apply Drop Shadow.

C&P Element 67 on to your image.
Resize to 50%. Position & apply Drop Shadow.

C&P Element 88 on to your image.
Resize to 65%. Position & apply Drop Shadow.

C&P your Tube on to your image.
DNR. Position & NO Drop Shadow.
Reduce Opacity to 60%.

C&P you Tube on to your image again.
Resize to 20% & Apply Drop Shadow.
Position to your liking.

Use the following Drop Shadow Settings for the tube & name:

Vertical: 2
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)

We are almost done now.
Add your name. I used font size 14 and color White with an outline color Blue.
I have also applied a Drop Shadow using the TUBE settings.

Add your copyright info, License number & Merge Visible.

Save & you're done. Simply & Easy.

I would love to see what you make using my tutorial.
Thank you for following my Tutorial & I hope you enjoyed it.
If you have any questions please feel free to email me at danceintherain1990@gmail.com

**** New CT Tutorial for Amy Marie - Spring ****


Now for the Tutorial

This tutorial is written with the assumption that you have working knowledge of PSP.
It was written by Dance In The Rain on 28th March 2015 & is intended for educational purposes only.

Supplies:
Scrap Kit: Spring by Amy Marie's Kits found HERE
Tube: Spring by Designs By Norella found HERE
Font of Choice - I used Sweet & Sassy
Mask: Number 6 by Millie's PSP Madness found HERE

♥ Lets get started ♥
For the Drop Shadow on everything except the tube I am using the following settings:
Vertical: 1
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)

Remember to save everything as you go along in order not to lose it in case of a crash.

DNR means Do Not Resize.
C&P means Copy & Paste.
DS means Drop Shadow.

I am using the following elements frames & Papers:
* Paper 1 - DNR
* Element 55 - Resized to 125%
* Element 73 - Resized to 125%
* Element 40 - Resized to 85%
* Element 50 - Resized to 125%
* Element 87 - Resized to 125%
* Element 88 - Resized to 65%
* Element 72- DNR
* Element 47 - DNR

You can look back at my image for placement of elements.

Open Paper 1 (DNR)
Open Mask in a different window (DNR)
Click on Paper 1 window and go to Layers, New Layer Group, Click ok.
Click on Layers again & New Mask Layer, From Image.
In the source window click on the Mask Layer. Click ok.

C&P Element 55 on to your mask layer.
Resize to 125%. Apply Drop Shadow & Position.

C&P Element 73 on to your image.
Resize to 125%. Position. Apply Drop Shadow.

C&P Element 40 on to your image.
Resize to 85%. Position & apply Drop Shadow.

C&P Element 50 on to your image.
Resize to 125%. Position & apply Drop Shadow.

Duplicate Element 50 - Mirror - No need to add extra Drop Shadow.

C&P Element 87 on to your image.
Resize to 125%. Position & apply Drop Shadow.

C&P Element 88 on to your image.
Resize to 65%. Position & apply Drop Shadow.

C&P Element 72 on to your image.
DNR. Position & apply Drop Shadow.

C&P Element 47 on to your image.
DNR. Position & apply Drop Shadow.

C&P your Tube on to your image.
Resize to 20%. Position & Apply Drop Shadow.

Use the following Drop Shadow Settings for the tube & name:

Vertical: 2
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)

We are almost done now.
Add your name. I used font size 18 and color White with an outline color Green.
I have also applied a Drop Shadow using the TUBE settings.

Add your copyright info, License number & Merge Visible.

Save & you're done. Simply & Easy.

I would love to see what you make using my tutorial.
Thank you for following my Tutorial & I hope you enjoyed it.
If you have any questions please feel free to email me at danceintherain1990@gmail.com

Friday 27 March 2015
**** New CT Timeline Set for ChocUkDesigns - Be Mine ****

I made this set using ChocUkDesigns Scrap Kit, Be Mine.
This Kit has an awesome 125 Elements & 17 Papers.
This Kit can be Purchased HERE.

I paired it with the awesome Tube, Abby by Swan Scraps.
This tube is Multi-Layered so will work with any Kits.
This Tube can be Purchased HERE.

Please DO NOT save this Set. It was made for the Kit Designer Only.



**** New CT Timeline Set for ChocUkDesigns - English Spring Tea ****

I made this set using ChocUkDesigns Scrap Kit, English Spring Tea.
This Kit has an awesome 113 Elements & 25 Papers.
This Kit can be Purchased HERE.

I paired it with the awesome Tube, Croupier by VeryMany.
This tube is Multi-Layered so will work with any Kits.
This Tube can be Purchased HERE.

Please DO NOT save this Set. It was made for the Kit Designer Only.





**** New CT Tutorial for Amy Marie - Baby Girl Angels ****


Now for the Tutorial

This tutorial is written with the assumption that you have working knowledge of PSP.
It was written by Dance In The Rain on 22nd March 2015 & is intended for educational purposes only.

Supplies:
Scrap Kit: Baby Girl Angels by Amy Marie's Kits found HERE
Tube: Baby Angel by VeryMany Tubes found HERE
Font of Choice - I used Angeilla Tattoo.
Mask: I don't know who's Mask this is. if it is yours please let me know.

♥ Lets get started ♥
For the Drop Shadow on everything except the tube I am using the following settings:
Vertical: 1
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)

Remember to save everything as you go along in order not to lose it in case of a crash.

DNR means Do Not Resize.
C&P means Copy & Paste.
DS means Drop Shadow.

I am using the following elements frames & Papers:
* Paper 18 - DNR
* Element 15 - Resized to 200%
* Element 30 - Resized to 125%
* Element 13 - Resized to 125%
* Element 106 - Resized to 125%
* Element 134 - DNR
* Element 107 - DNR
* Element 130 - DNR
* Element 132 - DNR
* Element 124 - Resized to 75%
* Element 49 - Resized to 75%

You can look back at my image for placement of elements.

Open Paper 18 (DNR)
Open Mask in a different window (DNR)
Click on Paper 18 window and go to Layers, New Layer Group, Click ok.
Click on Layers again & New Mask Layer, From Image.
In the source window click on the Mask Layer. Click ok.

C&P Element 15 on to your mask layer.
Resize to 200%. Apply Drop Shadow & Position.

Duplicate Element 15 - Flip Horizontally - Position - No need to add extra Drop Shadow.

C&P Element 30 on to your image.
Resize to 125%. Position. Apply Drop Shadow.

C&P Element 13 on to your image.
Resize to 125%. Position & apply Drop Shadow.

C&P Element 106 on to your image.
Resize to 125%. Position & apply Drop Shadow.

C&P Element 134 on to your image.
DNR. Position & apply Drop Shadow.

C&P Element 107 on to your image.
DNR. Position & apply Drop Shadow.

C&P Element 130 on to your image.
DNR. Position & apply Drop Shadow.

C&P Element 132 on to your image.
DNR. Position & apply Drop Shadow.

C&P Element 124 on to your image.
Resize to 75%. Position & apply Drop Shadow.

C&P Element 49 on to your image.
Resize to 75%. Position & apply Drop Shadow. 

C&P your Tube on to your image.
Resize to 65%. Position & Apply Drop Shadow.

Use the following Drop Shadow Settings for the tube & name:

Vertical: 2
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)

We are almost done now.
Add your name. I used font size 22 and color White with an outline color Pink.
I have also applied a Drop Shadow using the TUBE settings.

Add your copyright info, License number & Merge Visible.

Save & you're done. Simply & Easy.

I would love to see what you make using my tutorial.
Thank you for following my Tutorial & I hope you enjoyed it.
If you have any questions please feel free to email me at danceintherain1990@gmail.com


**** New CT Tutorial for Amy Marie's Kit Cherry Blossom & Norella's Tube, Cherry Blossom ****


Now for the Tutorial

This tutorial is written with the assumption that you have working knowledge of PSP.
It was written by Dance In The Rain on 22nd Match 2015 & is intended for educational purposes only.

Supplies:
Scrap Kit: Cherry Blossom by Amy Marie's Kits found HERE
Tube: Cherry Blossom by Designs By Norella found HERE
Font of Choice - I used Fairy Dust
Mask: Number 36 By Chrissy's Chaos found HERE

♥ Lets get started ♥
For the Drop Shadow on everything except the tube I am using the following settings:
Vertical: 1
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)

Remember to save everything as you go along in order not to lose it in case of a crash.

DNR means Do Not Resize.
C&P means Copy & Paste.
DS means Drop Shadow.

I am using the following elements frames & Papers:
* Paper 12 - DNR
* Element 21 - Resized to 150%
* Element 53 - Resized to 130%
* Element 27 - DNR
* Element 34 - DNR
* Element 76 - DNR
* Element 70 - DNR
* Element 51 - DNR
* Element 97 - Resized to 125%

You can look back at my image for placement of elements.

Open Paper 12 (DNR)
Open Mask in a different window (DNR)
Click on Paper 12 window and go to Layers, New Layer Group, Click ok.
Click on Layers again & New Mask Layer, From Image.
In the source window click on the Mask Layer. Click ok.

C&P Element 21 on to your mask layer.
Resize to 150%. Apply Drop Shadow & Position.

C&P Element 53 on to your image.
Resize to 130%. Position. Apply Drop Shadow.

C&P Element 27 on to your image.
DNR. Position & apply Drop Shadow.

C&P Element 34 on to your image.
DNR. Position & apply Drop Shadow.

C&P Element 76 on to your image.
DNR. Position & apply Drop Shadow.

C&P Element 70 on to your image.
DNR. Position & apply Drop Shadow.

C&P Element 51 on to your image.
DNR. Position & apply Drop Shadow.

C&P Element 97 on to your image.
Resize to 125%. Position & apply Drop Shadow.

C&P your Tube on to your image.
Resize to 25%. Position & Apply Drop Shadow.

Use the following Drop Shadow Settings for the tube & name:

Vertical: 2
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)

We are almost done now.
Add your name. I used font size 20 and color White with an outline color Pink.
I have also applied a Drop Shadow using the TUBE settings.

Add your copyright info, License number & Merge Visible.

Save & you're done. Simply & Easy.

I would love to see what you make using my tutorial.
Thank you for following my Tutorial & I hope you enjoyed it.
If you have any questions please feel free to email me at danceintherain1990@gmail.com

Saturday 21 March 2015
**** New CT Tutorial for Amy Marie's Kit, Lucky Bear & Swan Scraps Tube, Jenny ****


Now for the Tutorial
 
 This tutorial is written with the assumption that you have working knowledge of PSP.
It was written by Dance In The Rain on 21st March 2015 & is intended for educational purposes only.

Supplies:
Scrap Kit: Lucky Bear by Amy Marie's Kits found HERE
Tube: Jenny by Swan Scraps found HERE
Font of Choice - I used Celtic.
Mask: I'm not sure who's Mask this is. If it is yours please let me know.

♥ Lets get started ♥
For the Drop Shadow on everything except the tube I am using the following settings:
Vertical: 1
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)

Remember to save everything as you go along in order not to lose it in case of a crash.

DNR means Do Not Resize.
C&P means Copy & Paste.
DS means Drop Shadow.

I am using the following elements frames & Papers:
* Paper 1 - DNR
* Element 3 - Resized to 115%
* Element 8 - DNR
* Element 4 - Resized to 125%
* Element 54 - DNR
* Element 47 - Resized to 75%

You can look back at my image for placement of elements.

Open Paper 1 (DNR)
Open Mask in a different window (DNR)
Click on Paper 31 window and go to Layers, New Layer Group, Click ok.
Click on Layers again & New Mask Layer, From Image.
In the source window click on the Mask Layer. Click ok.

C&P Element 3 on to your mask layer.
Resize to 115%. Apply Drop Shadow & Position.

C&P Element 8 on to your image.
DNR. Position. Apply Drop Shadow.

C&P Element 4 on to your image.
Resize to 15025%. Position & apply Drop Shadow.

C&P Element 54 on to your image.
DNR. Position & apply Drop Shadow.

C&P Element 47 on to your image.
Resize to 75%. Position & apply Drop Shadow. .

C&P your Tube on to your image.
Resize to 65%. Position & Apply Drop Shadow.

Use the following Drop Shadow Settings for the tube & name:

Vertical: 2
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)

We are almost done now.
Add your name. I used font size 20 and color Green with an outline color Blue.
I have also applied a Drop Shadow using the TUBE settings.

Add your copyright info, License number & Merge Visible.

Save & you're done. Simply & Easy.

I would love to see what you make using my tutorial.
Thank you for following my Tutorial & I hope you enjoyed it.
If you have any questions please feel free to email me at danceintherain1990@gmail.com


Wednesday 4 March 2015
**** New CT Tutorial for Amy Marie - Irish Spring ****


Now for the Tutorial

This tutorial is written with the assumption that you have working knowledge of PSP.
It was written by Dance In The Rain on 4th March 2015 & is intended for educational purposes only.

Supplies:
Scrap Kit: Irish Spring by Amy Marie's Kits found HERE
Tube: No Tube was used. This is a Scraps only Tutorial.
Font of Choice - I used Stainy.
Mask: Number 8 By Chrissy's Chaos found HERE

♥ Lets get started ♥
For the Drop Shadow on everything except the tube I am using the following settings:
Vertical: 1
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)

Remember to save everything as you go along in order not to lose it in case of a crash.

DNR means Do Not Resize.
C&P means Copy & Paste.
DS means Drop Shadow.

I am using the following elements frames & Papers:
* Paper 19 - DNR
* Element 23 - Resized to 120%
* Element 103 - Resized to 120%
* Element 81 - Resized to 120%
* Element 14 - Resized to 120%
* Element 98 - Resized to 120%
* Element 78 - DNR
* Element 51 - DNR
* Element 50 - DNR
* Element 93 - DNR

You can look back at my image for placement of elements.

Open Paper 19 (DNR)
Open Mask in a different window (DNR)
Click on Paper 19 window and go to Layers, New Layer Group, Click ok.
Click on Layers again & New Mask Layer, From Image.
In the source window click on the Mask Layer. Click ok.

C&P Element 23 on to your mask layer.
Resize to 120%. Apply Drop Shadow & Position.

C&P Element 103 on to your image.
Resize to 120%. Position. Apply Drop Shadow.

C&P Element 81 on to your image.
Resize to 120%. Position & NO Drop Shadow.

C&P Element 14 on to your image.
Resize to 120%. Position & NO Drop Shadow.

C&P Element 98 on to your image.
Resize to 120%. Position & apply Drop Shadow.

C&P Element 78 on to your image.
DNR. Position & apply Drop Shadow.

Duplicate Element 78 - Flip Horizontally - Position - No need to add extra Drop Shadow.

C&P Element 51 on to your image.
DNR. Position & apply Drop Shadow.

C&P Element 50 on to your image.
DNR. Position & apply Drop Shadow.

C&P Element 93 on to your image.
DNR. Position & apply Drop Shadow.

C&P your Tube on to your image.
Resize to 50%. Position & Apply Drop Shadow.

Use the following Drop Shadow Settings for the name:

Vertical: 2
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)

We are almost done now.
Add your name. I used font size 20 and color White with an outline color Green.
I have also applied a Drop Shadow using the NAME settings.

Add your copyright info, License number & Merge Visible.

Save & you're done. Simply & Easy.

I would love to see what you make using my tutorial.
Thank you for following my Tutorial & I hope you enjoyed it.
If you have any questions please feel free to email me at danceintherain1990@gmail.com

**** New CT Tutorial for Amy Marie - Lucky In Love ****


Now for the Tutorial

This tutorial is written with the assumption that you have working knowledge of PSP.
It was written by Dance In The Rain on 4th March 2015 & is intended for educational purposes only.

Supplies:
Scrap Kit: Lucky In Love by Amy Marie's Kits found HERE
Tube: Sandra by Rzhevskii found HERE
Font of Choice - I used CaneLetter Sans
Mask: Number 8 By Chrissy's Chaos found HERE

♥ Lets get started ♥
For the Drop Shadow on everything except the tube I am using the following settings:
Vertical: 1
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)

Remember to save everything as you go along in order not to lose it in case of a crash.

DNR means Do Not Resize.
C&P means Copy & Paste.
DS means Drop Shadow.

I am using the following elements frames & Papers:
* Paper 14 - DNR
* Element 97 - Resized to 115%
* Element 105 - Resized to 125%
* Element 137 - Resized to 125%
* Element 106 - DNR
* Element 94 - Resized to 145%
* Element 51 - Resized to 75%
* Element 32 - DNR
* Element 66 - DNR

You can look back at my image for placement of elements.

Open Paper 14 (DNR)
Open Mask in a different window (DNR)
Click on Paper 14 window and go to Layers, New Layer Group, Click ok.
Click on Layers again & New Mask Layer, From Image.
In the source window click on the Mask Layer. Click ok.

C&P Element 97 on to your mask layer.
Resize to 115%. Apply Drop Shadow & Position.

C&P Element 105 on to your image.
Resize to 125%. Position. Apply Drop Shadow.

C&P Element 137 on to your image.
Resize to 125%. Position & apply Drop Shadow.

C&P Element 106 on to your image.
DNR. Position & apply Drop Shadow.

C&P Element 94 on to your image.
Resize to 145%. Position & apply Drop Shadow.

C&P Element 51 on to your image.
Resize to 75%. Position & apply Drop Shadow.

C&P Element 32 on to your image.
DNR. Position & apply Drop Shadow.

C&P Element 66 on to your image.
DNR. Position & apply Drop Shadow.

C&P your Tube on to your image.
Resize to 50%. Position & Apply Drop Shadow.

Use the following Drop Shadow Settings for the tube & name:

Vertical: 3
Horizontal: 3
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)

We are almost done now.
Add your name. I used font size 24 and color White with an outline color Green.
I have also applied a Drop Shadow using the TUBE settings.

Add your copyright info, License number & Merge Visible.

Save & you're done. Simply & Easy.

I would love to see what you make using my tutorial.
Thank you for following my Tutorial & I hope you enjoyed it.
If you have any questions please feel free to email me at danceintherain1990@gmail.com

**** New CT Tutorial for Drea's Creations - Sweet On You ****


Now for the Tutorial

This tutorial is written with the assumption that you have working knowledge of PSP.
It was written by Dance In The Rain on 4th March 2015 & is intended for educational purposes only.

Supplies:
Scrap Kit: Sweet On You by Drea's Creations found HERE
Tube: No Tube was used. This is a scraps only Tutorial.
Font of Choice - I used Angeface.
Mask: Number 35 by Chrissy's Chaos found HERE

♥ Lets get started ♥
For the Drop Shadow on everything except the tube I am using the following settings:
Vertical: 1
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)

Remember to save everything as you go along in order not to lose it in case of a crash.

DNR means Do Not Resize.
C&P means Copy & Paste.
DS means Drop Shadow.

I am using the following elements frames & Papers:
* Paper 16 - DNR
* Element 144 - Resized to 80%
* Element 101 - Resized to 75%
* Element 110 - Resized to 50%
* Element 114 - Resized to 65%
* Element 107 - DNR
* Element 117 - Resized to 35%
* Element 113 - Resized to 35%
* Element 56 - DNR
* Element 124 - Resized to 65%
* Element 54 - Resized to 65%

You can look back at my image for placement of elements.

Open Paper 16 (DNR)
Open Mask in a different window (DNR)
Click on Paper 16 window and go to Layers, New Layer Group, Click ok.
Click on Layers again & New Mask Layer, From Image.
In the source window click on the Mask Layer. Click ok.

C&P Element 144 on to your mask layer.
Resize to 80%. Apply Drop Shadow & Position.

C&P Element 101 on to your image.
Resize to 75%. Position. Apply Drop Shadow.

C&P Element 110 on to your image.
Resize to 50%. Position & apply Drop Shadow.

C&P Element 114 on to your image.
Resize to 65%. Position & apply Drop Shadow.
Rotate to your liking.

C&P Element 107 on to your image.
DNR. Position & apply Drop Shadow.

C&P Element 117 on to your image.
Resize to 35%. Position & apply Drop Shadow.

C&P Element 113 on to your image.
Resize to 35%. Position & apply Drop Shadow.

C&P Element 56 on to your image.
DNR. Position & apply Drop Shadow.

C&P Element 124 on to your image.
Resize to 65%. Position & apply Drop Shadow.

C&P Element 54 on to your image.
Resize to 65%. Position & apply Drop Shadow.

Use the following Drop Shadow Settings for the name:

Vertical: 3
Horizontal: 3
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)

We are almost done now.
Add your name. I used font size 48 and color Pink with and Outline color of White.
I have also applied a Drop Shadow using the Name settings.

Add your copyright info, License number & Merge Visible.

Save & you're done. Simply & Easy.

I would love to see what you make using my tutorial.
Thank you for following my Tutorial & I hope you enjoyed it.
If you have any questions please feel free to email me at danceintherain1990@gmail.com


**** New CT Tutorial for Drea's Creations - Broken Inside ****


Now for the Tutorial

This tutorial is written with the assumption that you have working knowledge of PSP.
It was written by Dance In The Rain on 4th March 2015 & is intended for educational purposes only.

Supplies:
Scrap Kit: Broken Inside by Drea's Creations found HERE
Tube: Dark Lady by Stella Felice found HERE
Font of Choice - I used Biloxi Script.
Mask: Number 28 by Chrissy's Chaos found HERE

♥ Lets get started ♥
For the Drop Shadow on everything except the tube I am using the following settings:
Vertical: 1
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)

Remember to save everything as you go along in order not to lose it in case of a crash.

DNR means Do Not Resize.
C&P means Copy & Paste.
DS means Drop Shadow.

I am using the following elements frames & Papers:
* Paper 5 - DNR
* Element 140 - Resized to 80%
* Element 115 - DNR
* Element 117 - Resized to 80%
* Element 121 - Resized to 80%
* Element 118 - Resized to 80%
* Element 128 - Resized to 80%
* Element 57 - Resized to 50%
* Element 43 - Resized to 60%
* Element 34 - Resized to 60%
* Element 102 - Resized to 80%
* Element 83 - Resized to 80%
* Element 8 - Resized to 55%

You can look back at my image for placement of elements.

Open Paper 5 (DNR)
Open Mask in a different window (DNR)
Click on Paper 5 window and go to Layers, New Layer Group, Click ok.
Click on Layers again & New Mask Layer, From Image.
In the source window click on the Mask Layer. Click ok.

C&P Element 140 on to your mask layer.
Resize to 80%. Apply Drop Shadow & Position.

C&P Element 115 on to your image.
DNR. Position. Apply Drop Shadow.

C&P Element 117 on to your image.
Resize to 80%. Position & apply Drop Shadow.

C&P Element 121 on to your image.
Resize to 80%. Position & apply Drop Shadow.

C&P Element 118 on to your image.
Resize to 80%. Position & apply Drop Shadow.

Duplicate Element 118 - Flip Horizontally - Position - No need to add extra Drop Shadow.

C&P Element 128 on to your image.
Resize to 80%. Position & apply Drop Shadow.

C&P Element 57 on to your image.
Resize to 50%. Position & apply Drop Shadow.

C&P Element 43 on to your image.
Resize to 60%. Position & apply Drop Shadow.

C&P Element 34 on to your image.
Resize to 60%. Position & apply Drop Shadow.

C&P Element 102 on to your image.
Resize to 80%. Position & apply Drop Shadow.

C&P Element 83 on to your image.
Resize to 80%. Position & NO Drop Shadow.

C&P Element 8 on to your image.
Resize to 55%. Position & apply Drop Shadow.

C&P your Tube on to your image.
Resize to 20%. Position & Apply Drop Shadow.

Use the following Drop Shadow Settings for the tube & name:

Vertical: 3
Horizontal: 3
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)

We are almost done now.
Add your name. I used font size 36 and color White.
I have also applied a Drop Shadow using the TUBE settings.

Add your copyright info, License number & Merge Visible.

Save & you're done. Simply & Easy.

I would love to see what you make using my tutorial.
Thank you for following my Tutorial & I hope you enjoyed it.
If you have any questions please feel free to email me at danceintherain1990@gmail.com

**** New CT Tutorial for Drea's Creations - Feelin' Irish ****


Now for the Tutorial

This tutorial is written with the assumption that you have working knowledge of PSP.
It was written by Dance In The Rain on 4th March 2015 & is intended for educational purposes only.

Supplies:
Scrap Kit: Feelin' Irish by Drea's Creations found HERE
Tube: Patty by Misticheskaya found HERE
Font of Choice - I used Celtic.
Mask: Number 8 by Chrissy's Chaos found HERE

♥ Lets get started ♥
For the Drop Shadow on everything except the tube I am using the following settings:
Vertical: 1
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)

Remember to save everything as you go along in order not to lose it in case of a crash.

DNR means Do Not Resize.
C&P means Copy & Paste.
DS means Drop Shadow.

I am using the following elements frames & Papers:
* Paper 24 - DNR
* Element 69 - Resized to 75%
* Element 72 - DNR
* Element 68 - Resized to 75%
* Element 66 - Resized to 75%
* Element 112 - Resized to 75%
* Paper 2 - Resized to 85%
* Element 105 - DNR
* Element 83 - Resized to 70%
* Element 17 - Resized to 50%
* Element 28 - Resized to 90%
* Element 84 - Resized to 50%
* Element 100 - Resized to 90%
* Element 64 - Resized to 30%
* Element 61 - Resized to 40%
* Element 58 - Resized to 40%
* Element 99 - Resized to 40%

You can look back at my image for placement of elements.

Open Paper 24 (DNR)
Open Mask in a different window (DNR)
Click on Paper 24 window and go to Layers, New Layer Group, Click ok.
Click on Layers again & New Mask Layer, From Image.
In the source window click on the Mask Layer. Click ok.

C&P Element 69 on to your mask layer.
Resize to 75%. Apply Drop Shadow & Position.

C&P Element 72 on to your image.
DNR. Position. NO Drop Shadow.

C&P Element 68 on to your image.
Resize to 75%. Position & apply Drop Shadow.

C&P Element 66 on to your image.
Resize to 75%. Position & apply Drop Shadow.

C&P Element 112 on to your image.
Resize to 75%. Position & apply Drop Shadow.

C&P Paper 2 on to your image.
Resize to 85%
Erase all that shows outside of Element 112.

Go to Effects - Texture Effects - Texture - Brick Wall Effect.
Use the following settings:

C&P Element 105 on to your image.
DNR. Position & apply Drop Shadow.

C&P Element 83 on to your image.
Resize to 70%. Position & apply Drop Shadow.

Duplicate Element 83 - Flip Horizontally - Position - No need to add extra Drop Shadow.

C&P Element 17 on to your image.
Resize to 50%. Position & apply Drop Shadow.

C&P Element 28 on to your image.
Resize to 90%. Position & apply Drop Shadow.

C&P Element 84 on to your image.
Resize to 50%. Position & apply Drop Shadow.

Duplicate Element 84 - Flip Horizontally - Position - No need to add extra Drop Shadow.

C&P Element 100 on to your image.
Resize to 90%. Position & apply Drop Shadow.

C&P Element 64 on to your image.
Resize to 30%. Position & apply Drop Shadow.

C&P Element 61 on to your image.
Resize to 40%. Position & apply Drop Shadow.

C&P Element 58 on to your image.
Resize to 40%. Position & apply Drop Shadow. 

C&P Element 99 on to your image.
Resize to 40%. Position & apply Drop Shadow.

C&P your Tube on to your image.
Resize to 40%. Position & Apply Drop Shadow.

Use the following Drop Shadow Settings for the tube & name:

Vertical: 3
Horizontal: 3
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)

We are almost done now.
Add your name. I used font size 36 and color White with an outline color Green.
I have also applied a Drop Shadow using the TUBE settings.

Add your copyright info, License number & Merge Visible.

Save & you're done. Simply & Easy.

I would love to see what you make using my tutorial.
Thank you for following my Tutorial & I hope you enjoyed it.
If you have any questions please feel free to email me at danceintherain1990@gmail.com

Tuesday 3 March 2015
**** New CT Tutorial for Amy Marie's Kit, Ailee & Designs By Norella's Tube, Ailee ****


Now for the Tutorial

This tutorial is written with the assumption that you have working knowledge of PSP.
It was written by Dance In The Rain on 3rd March 2015 & is intended for educational purposes only.

Supplies:
Scrap Kit: Ailee by Amy Marie's Kits found HERE
Tube: Ailee by Designs By Norella found HERE
Font of Choice - I used Fox In The Snow.
Mask: Number 56 by Rissa's Designs found HERE

♥ Lets get started ♥
For the Drop Shadow on everything except the tube I am using the following settings:
Vertical: 1
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)

Remember to save everything as you go along in order not to lose it in case of a crash.

DNR means Do Not Resize.
C&P means Copy & Paste.
DS means Drop Shadow.

I am using the following elements frames & Papers:
* Paper 3 - DNR
* Element 18 - Resized to 150%
* Element 24 - Resized to 150%
* Element 19 - Resized to 175%
* Element 22 - Resized to 175%
* Element 86 - DNR
* Element 87 - DNR
* Element 126 - Resized to 130%
* Element 120 - DNR
* Element 51 - DNR
* Element 80 - DNR
* Element 107 - Resized to 85%
* Element 85 - Resized to 140%
* Element 42 - DNR

You can look back at my image for placement of elements.

Open Paper 3 (DNR)
Open Mask in a different window (DNR)
Click on Paper 3 window and go to Layers, New Layer Group, Click ok.
Click on Layers again & New Mask Layer, From Image.
In the source window click on the Mask Layer. Click ok.

C&P Element 18 on to your mask layer.
Resize to 150%. Apply Drop Shadow & Position.

C&P Element 24 on to your image.
Resize to 150%. Position. Apply Drop Shadow.

C&P Element 19 on to your image.
Resize to 175%. Position & apply Drop Shadow.

C&P Element 22 on to your image.
Resize to 175%. Position & apply Drop Shadow.

Duplicate Element 22 - Flip Horizontally - Position - No need to extra Drop Shadow.

C&P Element 86 on to your image.
DNR. Position & apply Drop Shadow.

C&P Element 87 on to your image.
DNR. Position & apply Drop Shadow.

C&P Element 126 on to your image.
Resize to 130%. Position & apply Drop Shadow.

C&P Element 120 on to your image.
DNR. Position & NO Drop Shadow.

C&P Element 51 on to your image.
DNR. Position & apply Drop Shadow.

C&P Element 80 on to your image.
DNR. Position & apply Drop Shadow.

C&P Element 107 on to your image.
Resize to 85%. Position & apply Drop Shadow.

C&P Element 85 on to your image.
Resize to 140%. Position & NO Drop Shadow.

C&P Element 42 on to your image.
DNR. Position & apply Drop Shadow.

C&P your Tube on to your image.
Resize to 20%. Position & Apply Drop Shadow.

Use the following Drop Shadow Settings for the tube & name:

Vertical: 3
Horizontal: 3
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)

We are almost done now.
Add your name. I used font size 20 and color Light Pink.
I have also applied a Drop Shadow using the TUBE settings.

Add your copyright info, License number & Merge Visible.

Save & you're done. Simply & Easy.

I would love to see what you make using my tutorial.
Thank you for following my Tutorial & I hope you enjoyed it.
If you have any questions please feel free to email me at danceintherain1990@gmail.com


Followers

Categories

Archives