Thursday 21 May 2015
**** New CT Tutorial for Amy Marie - Alexis ****
Now for the Tutorial
This tutorial is written with the assumption that you have working knowledge of PSP.
It was written by Dance In The Rain on 21st May 2015 & is intended for educational purposes only.
Supplies:
Scrap Kit: Alexis by Amy Marie's Kits found HERE
Tube: Liana by Tais found HERE
Font of Choice - I used Amber
Mask: Number 79 by Rissa's Designs found HERE
♥ Lets get started ♥
For the Drop Shadow on everything except the tube I am using the following settings:
Vertical: 1
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)
Remember to save everything as you go along in order not to lose it in case of a crash.
DNR means Do Not Resize.
C&P means Copy & Paste.
DS means Drop Shadow.
I am using the following elements frames & Papers:
* Paper 9 - DNR
* Element 46 - Resized to 80%
* Element 89 - DNR
* Element 1 - Resized to 115%
* Element 96 - Resized to 85%
* Element 12 - DNR
* Element 24 - DNR
* Element 95 - Resized to 50%
* Element 39 - DNR
* Element 85 - DNR
* Element 13 - Resized to 55%
* Element 71 - DNR
You can look back at my image for placement of elements.
Open Paper 9 (DNR)
Open Mask in a different window (DNR)
Click on Paper 9 window and go to Layers, New Layer Group, Click ok.
Click on Layers again & New Mask Layer, From Image.
In the source window click on the Mask Layer. Click ok.
Duplicate Mask Group Layer & Mirror the duplicated layer as shown below:
It was written by Dance In The Rain on 21st May 2015 & is intended for educational purposes only.
Supplies:
Scrap Kit: Alexis by Amy Marie's Kits found HERE
Tube: Liana by Tais found HERE
Font of Choice - I used Amber
Mask: Number 79 by Rissa's Designs found HERE
♥ Lets get started ♥
For the Drop Shadow on everything except the tube I am using the following settings:
Vertical: 1
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)
Remember to save everything as you go along in order not to lose it in case of a crash.
DNR means Do Not Resize.
C&P means Copy & Paste.
DS means Drop Shadow.
I am using the following elements frames & Papers:
* Paper 9 - DNR
* Element 46 - Resized to 80%
* Element 89 - DNR
* Element 1 - Resized to 115%
* Element 96 - Resized to 85%
* Element 12 - DNR
* Element 24 - DNR
* Element 95 - Resized to 50%
* Element 39 - DNR
* Element 85 - DNR
* Element 13 - Resized to 55%
* Element 71 - DNR
You can look back at my image for placement of elements.
Open Paper 9 (DNR)
Open Mask in a different window (DNR)
Click on Paper 9 window and go to Layers, New Layer Group, Click ok.
Click on Layers again & New Mask Layer, From Image.
In the source window click on the Mask Layer. Click ok.
Duplicate Mask Group Layer & Mirror the duplicated layer as shown below:
C&P Element 46 on to your mask layer.
Resize to 80%.
Rotate 90 degrees to the left - Duplicate & Mirror.
Move the Duplicated Layer down & Apply Drop Shadow to both Layers.
C&P Element 89 on to your image.
DNR. Position. Apply Drop Shadow.
C&P Element 1 on to your image.
Resize to 115%. Position & apply Drop Shadow.
C&P Element 96 on to your image.
Resize to 85%. Position & apply Drop Shadow.
C&P Element 12 on to your image.
DNR. Position & apply Drop Shadow.
C&P Element 24 on to your image.
DNR. Position & NO Drop Shadow.
Duplicate Element 24 - Mirror - Flip Vertically.
C&P Element 95 on to your image.
Resize to 50%. Position & apply Drop Shadow.
C&P Element 39 on to your image.
DNR. Position & apply Drop Shadow.
C&P Element 85 on to your image.
DNR. Position & apply Drop Shadow.
C&P Element 13 on to your image.
Resize to 55%. Position & apply Drop Shadow.
C&P Element 71 on to your image.
DNR. Position & apply Drop Shadow.
C&P your Tube on to your image.
DNR. Position & Apply Drop Shadow.
Duplicate Layer & Mirror - Move the Duplicated layer down & apply Drop Shadow to both layers.
Go to Effects - Photo Effects - Black & White Film & Apply.
As shown in the image below:
You need to do this on both the tube layers.
Make sure you erase any of the tubes showing outside the frames. Both tube layers need to be under the frame layers.
C&P your Tube on to your image again.
Resize to 40%. Position & Apply Drop Shadow.
Use the following Drop Shadow Settings for the tube & name:
Vertical: 2
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)
We are almost done now.
Add your name. I used font size 30 and color White.
I have also applied a Drop Shadow using the TUBE settings.
Add your copyright info, License number & Merge Visible.
Save & you're done. Simply & Easy.
I would love to see what you make using my tutorial.
Thank you for following my Tutorial & I hope you enjoyed it.
If you have any questions please feel free to email me at danceintherain1990@gmail.com
**** New CT Tutorial for Amy Marie - Zoey ****
Now for the Tutorial
This tutorial is written with the assumption that you have working knowledge of PSP.
It was written by Dance In The Rain on 21st May 2015 & is intended for educational purposes only.
Supplies:
Scrap Kit: Zoey by Amy Marie's Kits found HERE
Tube: Charlotte by Fedor found HERE
Font of Choice - I used Dominique
Mask: I'm not sure who's Mask this is. If it is yours please let me know.
♥ Lets get started ♥
For the Drop Shadow on everything except the tube I am using the following settings:
Vertical: 1
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)
Remember to save everything as you go along in order not to lose it in case of a crash.
DNR means Do Not Resize.
C&P means Copy & Paste.
DS means Drop Shadow.
I am using the following elements frames & Papers:
* Paper 19 - DNR
* Element 58 - Resized to 150%
* Element 46 - Resized to 125%
* Element 26 - Resized to 150%
* Element 119 - Resized to 155%
* Element 118 - Resized to 155%
* Element 104 - DNR
* Element 103 - DNR
* Element 134 - DNR
* Element 137 - Resized to 55%
* Element 101 - DNR
You can look back at my image for placement of elements.
Open Paper 19 (DNR)
Open Mask in a different window (DNR)
Click on Paper 19 window and go to Layers, New Layer Group, Click ok.
Click on Layers again & New Mask Layer, From Image.
In the source window click on the Mask Layer. Click ok.
C&P Element 58 on to your mask layer.
Resize to 150%. NO Drop Shadow & Position.
C&P Element 46 on to your image.
Resize to 125%. Position. Apply Drop Shadow.
C&P Element 26 on to your image.
Resize to 150%. Position & apply Drop Shadow.
C&P Element 119 on to your image.
Resize to 155%. Position & apply Drop Shadow.
Duplicate Element - Mirror.
C&P Element 118 on to your image.
Resize to 155%. Position & apply Drop Shadow.
Duplicate Element - Mirror.
C&P Element 104 on to your image.
DNR. Position & apply Drop Shadow.
Duplicate Element - Mirror.
C&P Element 103 on to your image.
DNR. Position & apply Drop Shadow.
C&P Element 134 on to your image.
DNR. Position & apply Drop Shadow.
C&P Element 137 on to your image.
Resize to 55%. Position & apply Drop Shadow.
C&P Element 101 on to your image.
DNR. Position & apply Drop Shadow.
C&P your Tube on to your image.
Resize to 40%. Position & Apply Drop Shadow.
Use the following Drop Shadow Settings for the tube & name:
Vertical: 2
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)
We are almost done now.
Add your name. I used font size 22 and color White with an outline color Brown.
I have also applied a Drop Shadow using the TUBE settings.
Add your copyright info, License number & Merge Visible.
Save & you're done. Simply & Easy.
I would love to see what you make using my tutorial.
Thank you for following my Tutorial & I hope you enjoyed it.
If you have any questions please feel free to email me at danceintherain1990@gmail.com
It was written by Dance In The Rain on 21st May 2015 & is intended for educational purposes only.
Supplies:
Scrap Kit: Zoey by Amy Marie's Kits found HERE
Tube: Charlotte by Fedor found HERE
Font of Choice - I used Dominique
Mask: I'm not sure who's Mask this is. If it is yours please let me know.
♥ Lets get started ♥
For the Drop Shadow on everything except the tube I am using the following settings:
Vertical: 1
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)
Remember to save everything as you go along in order not to lose it in case of a crash.
DNR means Do Not Resize.
C&P means Copy & Paste.
DS means Drop Shadow.
I am using the following elements frames & Papers:
* Paper 19 - DNR
* Element 58 - Resized to 150%
* Element 46 - Resized to 125%
* Element 26 - Resized to 150%
* Element 119 - Resized to 155%
* Element 118 - Resized to 155%
* Element 104 - DNR
* Element 103 - DNR
* Element 134 - DNR
* Element 137 - Resized to 55%
* Element 101 - DNR
You can look back at my image for placement of elements.
Open Paper 19 (DNR)
Open Mask in a different window (DNR)
Click on Paper 19 window and go to Layers, New Layer Group, Click ok.
Click on Layers again & New Mask Layer, From Image.
In the source window click on the Mask Layer. Click ok.
C&P Element 58 on to your mask layer.
Resize to 150%. NO Drop Shadow & Position.
C&P Element 46 on to your image.
Resize to 125%. Position. Apply Drop Shadow.
C&P Element 26 on to your image.
Resize to 150%. Position & apply Drop Shadow.
C&P Element 119 on to your image.
Resize to 155%. Position & apply Drop Shadow.
Duplicate Element - Mirror.
C&P Element 118 on to your image.
Resize to 155%. Position & apply Drop Shadow.
Duplicate Element - Mirror.
C&P Element 104 on to your image.
DNR. Position & apply Drop Shadow.
Duplicate Element - Mirror.
C&P Element 103 on to your image.
DNR. Position & apply Drop Shadow.
C&P Element 134 on to your image.
DNR. Position & apply Drop Shadow.
C&P Element 137 on to your image.
Resize to 55%. Position & apply Drop Shadow.
C&P Element 101 on to your image.
DNR. Position & apply Drop Shadow.
C&P your Tube on to your image.
Resize to 40%. Position & Apply Drop Shadow.
Use the following Drop Shadow Settings for the tube & name:
Vertical: 2
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)
We are almost done now.
Add your name. I used font size 22 and color White with an outline color Brown.
I have also applied a Drop Shadow using the TUBE settings.
Add your copyright info, License number & Merge Visible.
Save & you're done. Simply & Easy.
I would love to see what you make using my tutorial.
Thank you for following my Tutorial & I hope you enjoyed it.
If you have any questions please feel free to email me at danceintherain1990@gmail.com
**** New CT Tutorial for Amy Marie's Kit Delinda & Tiny Turtle Designs Store. Selisan Al-Gaib's Tube, Delinda ****
Now for the Tutorial
This tutorial is written with the assumption that you have working knowledge of PSP.
It was written by Dance In The Rain on 21st May 2015 & is intended for educational purposes only.
Supplies:
Scrap Kit: Delinda by Amy Marie's Kits found HERE
Tube: Delinda by Selisan Al-Gaib found HERE
Font of Choice - I used Dominique
Mask: Number 8 by Chrissy's Chaos found HERE
♥ Lets get started ♥
For the Drop Shadow on everything except the tube I am using the following settings:
Vertical: 1
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)
Remember to save everything as you go along in order not to lose it in case of a crash.
DNR means Do Not Resize.
C&P means Copy & Paste.
DS means Drop Shadow.
I am using the following elements frames & Papers:
* Paper 5 - DNR
* Element 46 - Resized to 185%
* Element 124 - Resized to 115%
* Element 105 - Resized to 125%
* Element 93 - DNR
* Element 9 - DNR
* Element 30 - Resized to 135%
You can look back at my image for placement of elements.
Open Paper 5 (DNR)
Open Mask in a different window (DNR)
Click on Paper 5 window and go to Layers, New Layer Group, Click ok.
Click on Layers again & New Mask Layer, From Image.
In the source window click on the Mask Layer. Click ok.
C&P Element 46 on to your mask layer.
Resize to 185%. Apply Drop Shadow & Position.
C&P Element 124 on to your image.
Resize to 115%. Position. Apply Drop Shadow.
C&P Element 105 on to your image.
Resize to 125%. Position & apply Drop Shadow.
Duplicate Element 105 - Mirror.
C&P Element 93 on to your image.
DNR. Position & apply Drop Shadow.
Duplicate Element 93 - Mirror.
C&P Element 9 on to your image.
DNR. Position & apply Drop Shadow.
Duplicate Element 9 - Mirror.
C&P Element 30 on to your image.
Resize to 135%. Position & apply Drop Shadow.
C&P your Tube on to your image.
Resize to 50%. Position & Apply Drop Shadow.
Use the following Drop Shadow Settings for the tube & name:
Vertical: 2
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)
We are almost done now.
Add your name. I used font size 20 and color White with an outline color Purple.
I have also applied a Drop Shadow using the TUBE settings.
Add your copyright info, License number & Merge Visible.
Save & you're done. Simply & Easy.
I would love to see what you make using my tutorial.
Thank you for following my Tutorial & I hope you enjoyed it.
If you have any questions please feel free to email me at danceintherain1990@gmail.com
It was written by Dance In The Rain on 21st May 2015 & is intended for educational purposes only.
Supplies:
Scrap Kit: Delinda by Amy Marie's Kits found HERE
Tube: Delinda by Selisan Al-Gaib found HERE
Font of Choice - I used Dominique
Mask: Number 8 by Chrissy's Chaos found HERE
♥ Lets get started ♥
For the Drop Shadow on everything except the tube I am using the following settings:
Vertical: 1
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)
Remember to save everything as you go along in order not to lose it in case of a crash.
DNR means Do Not Resize.
C&P means Copy & Paste.
DS means Drop Shadow.
I am using the following elements frames & Papers:
* Paper 5 - DNR
* Element 46 - Resized to 185%
* Element 124 - Resized to 115%
* Element 105 - Resized to 125%
* Element 93 - DNR
* Element 9 - DNR
* Element 30 - Resized to 135%
You can look back at my image for placement of elements.
Open Paper 5 (DNR)
Open Mask in a different window (DNR)
Click on Paper 5 window and go to Layers, New Layer Group, Click ok.
Click on Layers again & New Mask Layer, From Image.
In the source window click on the Mask Layer. Click ok.
C&P Element 46 on to your mask layer.
Resize to 185%. Apply Drop Shadow & Position.
C&P Element 124 on to your image.
Resize to 115%. Position. Apply Drop Shadow.
C&P Element 105 on to your image.
Resize to 125%. Position & apply Drop Shadow.
Duplicate Element 105 - Mirror.
C&P Element 93 on to your image.
DNR. Position & apply Drop Shadow.
Duplicate Element 93 - Mirror.
C&P Element 9 on to your image.
DNR. Position & apply Drop Shadow.
Duplicate Element 9 - Mirror.
C&P Element 30 on to your image.
Resize to 135%. Position & apply Drop Shadow.
C&P your Tube on to your image.
Resize to 50%. Position & Apply Drop Shadow.
Use the following Drop Shadow Settings for the tube & name:
Vertical: 2
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)
We are almost done now.
Add your name. I used font size 20 and color White with an outline color Purple.
I have also applied a Drop Shadow using the TUBE settings.
Add your copyright info, License number & Merge Visible.
Save & you're done. Simply & Easy.
I would love to see what you make using my tutorial.
Thank you for following my Tutorial & I hope you enjoyed it.
If you have any questions please feel free to email me at danceintherain1990@gmail.com
Wednesday 20 May 2015
**** New CT Tutorial for Amy Marie - Chloe ****
Now for the Tutorial
This tutorial is written with the assumption that you have working knowledge of PSP.
It was written by Dance In The Rain on 20th May 2015 & is intended for educational purposes only.
Supplies:
Scrap Kit: Chloe by Amy Marie's Kits found HERE
Tube: Blossom Fairy by Alex Prihodko found HERE
Font of Choice - I used Kikelet
Mask: Number 42 by Millie's PSP Madness found HERE
♥ Lets get started ♥
For the Drop Shadow on everything except the tube I am using the following settings:
Vertical: 1
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)
Remember to save everything as you go along in order not to lose it in case of a crash.
DNR means Do Not Resize.
C&P means Copy & Paste.
DS means Drop Shadow.
I am using the following elements frames & Papers:
* Paper 10 - DNR
* Element 3 - Resized to 125%
* Element 52 - Resized to 115%
* Element 47 - Resized to 145%
* Element 2 - DNR
* Element 41 - DNR
* Element 37 - DNR
* Element 8 - DNR
You can look back at my image for placement of elements.
Open Paper 10 (DNR)
Open Mask in a different window (DNR)
Click on Paper 10 window and go to Layers, New Layer Group, Click ok.
Click on Layers again & New Mask Layer, From Image.
In the source window click on the Mask Layer. Click ok.
C&P Element 3 on to your mask layer.
Resize to 125%. Apply Drop Shadow & Position.
C&P Element 52 on to your image.
Resize to 115%. Position. Apply Drop Shadow.
C&P Element 47 on to your image.
Resize to 145%. Position & apply Drop Shadow.
Duplicate Element 47 - Mirror.
C&P Element 2 on to your image.
DNR. Position & apply Drop Shadow.
Duplicate Element 2 - Mirror.
C&P Element 41 on to your image.
DNR. Position & apply Drop Shadow.
Duplicate Element 41 - Mirror.
C&P Element 37 on to your image.
DNR. Position & apply Drop Shadow.
C&P Element 8 on to your image.
DNR. Position & apply Drop Shadow.
Duplicate Element 8 - Mirror - Rotate to liking.
C&P your Tube on to your image.
Resize to 65%. Position & Apply Drop Shadow.
Use the following Drop Shadow Settings for the tube & name:
Vertical: 2
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)
We are almost done now.
Add your name. I used font size 22 and color Black with an outline color Green.
I have also applied a Drop Shadow using the TUBE settings.
Add your copyright info, License number & Merge Visible.
Save & you're done. Simply & Easy.
I would love to see what you make using my tutorial.
Thank you for following my Tutorial & I hope you enjoyed it.
If you have any questions please feel free to email me at danceintherain1990@gmail.com
It was written by Dance In The Rain on 20th May 2015 & is intended for educational purposes only.
Supplies:
Scrap Kit: Chloe by Amy Marie's Kits found HERE
Tube: Blossom Fairy by Alex Prihodko found HERE
Font of Choice - I used Kikelet
Mask: Number 42 by Millie's PSP Madness found HERE
♥ Lets get started ♥
For the Drop Shadow on everything except the tube I am using the following settings:
Vertical: 1
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)
Remember to save everything as you go along in order not to lose it in case of a crash.
DNR means Do Not Resize.
C&P means Copy & Paste.
DS means Drop Shadow.
I am using the following elements frames & Papers:
* Paper 10 - DNR
* Element 3 - Resized to 125%
* Element 52 - Resized to 115%
* Element 47 - Resized to 145%
* Element 2 - DNR
* Element 41 - DNR
* Element 37 - DNR
* Element 8 - DNR
You can look back at my image for placement of elements.
Open Paper 10 (DNR)
Open Mask in a different window (DNR)
Click on Paper 10 window and go to Layers, New Layer Group, Click ok.
Click on Layers again & New Mask Layer, From Image.
In the source window click on the Mask Layer. Click ok.
C&P Element 3 on to your mask layer.
Resize to 125%. Apply Drop Shadow & Position.
C&P Element 52 on to your image.
Resize to 115%. Position. Apply Drop Shadow.
C&P Element 47 on to your image.
Resize to 145%. Position & apply Drop Shadow.
Duplicate Element 47 - Mirror.
C&P Element 2 on to your image.
DNR. Position & apply Drop Shadow.
Duplicate Element 2 - Mirror.
C&P Element 41 on to your image.
DNR. Position & apply Drop Shadow.
Duplicate Element 41 - Mirror.
C&P Element 37 on to your image.
DNR. Position & apply Drop Shadow.
C&P Element 8 on to your image.
DNR. Position & apply Drop Shadow.
Duplicate Element 8 - Mirror - Rotate to liking.
C&P your Tube on to your image.
Resize to 65%. Position & Apply Drop Shadow.
Use the following Drop Shadow Settings for the tube & name:
Vertical: 2
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)
We are almost done now.
Add your name. I used font size 22 and color Black with an outline color Green.
I have also applied a Drop Shadow using the TUBE settings.
Add your copyright info, License number & Merge Visible.
Save & you're done. Simply & Easy.
I would love to see what you make using my tutorial.
Thank you for following my Tutorial & I hope you enjoyed it.
If you have any questions please feel free to email me at danceintherain1990@gmail.com
Tuesday 19 May 2015
**** New CT Tutorial for Amy Marie - Alavda ****
Now for the Tutorial
This tutorial is written with the assumption that you have working knowledge of PSP.
It was written by Dance In The Rain on 19th May 2015 & is intended for educational purposes only.
Supplies:
Scrap Kit: Alavda by Amy Marie's Kits found HERE
Tube: Braid by Nocturne found HERE
Font of Choice - I used Oh Hello
Mask: Number 6 by Millie's PSP Madness found HERE
♥ Lets get started ♥
For the Drop Shadow on everything except the tube I am using the following settings:
Vertical: 1
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)
Remember to save everything as you go along in order not to lose it in case of a crash.
DNR means Do Not Resize.
C&P means Copy & Paste.
DS means Drop Shadow.
I am using the following elements frames & Papers:
* Paper 17 - DNR
* Element 25 - Resized to 115%
* Element 50 - Resized to 150%
* Element 51 - DNR
* Element 117 - DNR
* Element 89 - DNR
* Element 107 - Resized to 60%
* Element 48 - DNR
* Element 5 - Resized to 120%
* Element 4 - Resized to 120%
You can look back at my image for placement of elements.
Open Paper 17 (DNR)
Open Mask in a different window (DNR)
Click on Paper 17 window and go to Layers, New Layer Group, Click ok.
Click on Layers again & New Mask Layer, From Image.
In the source window click on the Mask Layer. Click ok.
C&P Element 25 on to your mask layer.
Resize to 115%. Apply Drop Shadow & Position.
C&P Element 50 on to your image.
Resized to 150%. Position. Apply Drop Shadow.
Duplicate Element - Mirror.
C&P Element 51 on to your image.
DNR. Position & apply Drop Shadow.
C&P Element 117 on to your image.
DNR. Position & apply Drop Shadow.
C&P Element 89 on to your image.
DNR. Position & apply Drop Shadow.
C&P Element 107 on to your image.
Resize to 60%. Position & apply Drop Shadow.
C&P Element 48 on to your image.
DNR. Position & apply Drop Shadow.
C&P Element 5 on to your image.
Resized to 120%. Position & apply Drop Shadow.
C&P Element 4 on to your image.
Resized to 120%. Position. Apply Drop Shadow.
C&P your Tube on to your image.
Resize to 75%. Position & Apply Drop Shadow.
Use the following Drop Shadow Settings for the tube & name:
Vertical: 3
Horizontal: 3
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)
We are almost done now.
Add your name. I used font size 20 and color White with an outline color Grey.
I have also applied a Drop Shadow using the TUBE settings.
Add your copyright info, License number & Merge Visible.
Save & you're done. Simply & Easy.
I would love to see what you make using my tutorial.
Thank you for following my Tutorial & I hope you enjoyed it.
If you have any questions please feel free to email me at danceintherain1990@gmail.com
It was written by Dance In The Rain on 19th May 2015 & is intended for educational purposes only.
Supplies:
Scrap Kit: Alavda by Amy Marie's Kits found HERE
Tube: Braid by Nocturne found HERE
Font of Choice - I used Oh Hello
Mask: Number 6 by Millie's PSP Madness found HERE
♥ Lets get started ♥
For the Drop Shadow on everything except the tube I am using the following settings:
Vertical: 1
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)
Remember to save everything as you go along in order not to lose it in case of a crash.
DNR means Do Not Resize.
C&P means Copy & Paste.
DS means Drop Shadow.
I am using the following elements frames & Papers:
* Paper 17 - DNR
* Element 25 - Resized to 115%
* Element 50 - Resized to 150%
* Element 51 - DNR
* Element 117 - DNR
* Element 89 - DNR
* Element 107 - Resized to 60%
* Element 48 - DNR
* Element 5 - Resized to 120%
* Element 4 - Resized to 120%
You can look back at my image for placement of elements.
Open Paper 17 (DNR)
Open Mask in a different window (DNR)
Click on Paper 17 window and go to Layers, New Layer Group, Click ok.
Click on Layers again & New Mask Layer, From Image.
In the source window click on the Mask Layer. Click ok.
C&P Element 25 on to your mask layer.
Resize to 115%. Apply Drop Shadow & Position.
C&P Element 50 on to your image.
Resized to 150%. Position. Apply Drop Shadow.
Duplicate Element - Mirror.
C&P Element 51 on to your image.
DNR. Position & apply Drop Shadow.
C&P Element 117 on to your image.
DNR. Position & apply Drop Shadow.
C&P Element 89 on to your image.
DNR. Position & apply Drop Shadow.
C&P Element 107 on to your image.
Resize to 60%. Position & apply Drop Shadow.
C&P Element 48 on to your image.
DNR. Position & apply Drop Shadow.
C&P Element 5 on to your image.
Resized to 120%. Position & apply Drop Shadow.
C&P Element 4 on to your image.
Resized to 120%. Position. Apply Drop Shadow.
C&P your Tube on to your image.
Resize to 75%. Position & Apply Drop Shadow.
Use the following Drop Shadow Settings for the tube & name:
Vertical: 3
Horizontal: 3
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)
We are almost done now.
Add your name. I used font size 20 and color White with an outline color Grey.
I have also applied a Drop Shadow using the TUBE settings.
Add your copyright info, License number & Merge Visible.
Save & you're done. Simply & Easy.
I would love to see what you make using my tutorial.
Thank you for following my Tutorial & I hope you enjoyed it.
If you have any questions please feel free to email me at danceintherain1990@gmail.com
Thursday 7 May 2015
**** New CT Tutorial for Amy Marie - Spring Awakening ****
Now for the Tutorial
This tutorial is written with the assumption that you have working knowledge of PSP.
It was written by Dance In The Rain on 7th May 2015 & is intended for educational purposes only.
Supplies:
Scrap Kit: Spring Awakening by Amy Marie's Kits found HERE
Tube: Carla by Chris Pastel found HERE
Font of Choice - I used Follow You Into The World.
Mask: Number 35 by Chrissy's Chaos found HERE
♥ Lets get started ♥
For the Drop Shadow on everything except the tube I am using the following settings:
Vertical: 1
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)
Remember to save everything as you go along in order not to lose it in case of a crash.
DNR means Do Not Resize.
C&P means Copy & Paste.
DS means Drop Shadow.
I am using the following elements frames & Papers:
* Paper 15 - DNR
* Element 59 - Resized to 115%
* Element 63 - Resized to 145%
* Element 83 - Resized to 85%
* Element 8 - DNR
* Element 79 - Resized to 75%
* Element 9 - Resized to 75%
* Element 82 - DNR
* Element 113 - DNR
* Element 115 - DNR
* Element 88 - DNR
* Element 99 - DNR
* Element 29 - Resized to 50%
* Element 64 - Resized to 50%
* Element 65 - Resized to 70%
* Element 11 - Resized to 60%
* Element 95 - Resized to 60%
You can look back at my image for placement of elements.
Open Paper 15 (DNR)
Open Mask in a different window (DNR)
Click on Paper 15 window and go to Layers, New Layer Group, Click ok.
Click on Layers again & New Mask Layer, From Image.
In the source window click on the Mask Layer. Click ok.
C&P Element 59 on to your mask layer.
Resize to 115%. Apply Drop Shadow & Position.
C&P Element 63 on to your image.
Resize to 145%. Position. NO Drop Shadow.
C&P Element 83 on to your image.
Resize to 85%. Position & apply Drop Shadow.
C&P Element 8 on to your image.
DNR. Position & apply Drop Shadow.
C&P Element 79 on to your image.
Resize to 75%. Position & apply Drop Shadow.
C&P Element 9 on to your image.
Resize to 75%. Position & apply Drop Shadow.
C&P Element 82 on to your image.
DNR. Position & apply Drop Shadow.
C&P Element 113 on to your image.
DNR. Position & apply Drop Shadow.
C&P Element 115 on to your image.
DNR. Position & apply Drop Shadow.
C&P Element 88 on to your image.
DNR. Position & apply Drop Shadow.
C&P Element 99 on to your image.
DNR. Position & apply Drop Shadow.
C&P Element 29 on to your image.
Resize to 50%. Position & apply Drop Shadow.
C&P Element 64 on to your image.
Resize to 50%. Position & apply Drop Shadow.
C&P Element 65 on to your image.
Resize to 70%. Position & apply Drop Shadow.
C&P Element11 on to your image.
Resize to 60%. Position & apply Drop Shadow.
C&P Element 95 on to your image.
Resize to 60%. Position & apply Drop Shadow.
C&P your Tube on to your image.
Resize to 60%. Position & Apply Drop Shadow.
Use the following Drop Shadow Settings for the tube & name:
Vertical: 2
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)
We are almost done now.
Add your name. I used font size 18 and color White with an outline color Orange.
I have also applied a Drop Shadow using the TUBE settings.
Add your copyright info, License number & Merge Visible.
Save & you're done. Simply & Easy.
I would love to see what you make using my tutorial.
Thank you for following my Tutorial & I hope you enjoyed it.
If you have any questions please feel free to email me at danceintherain1990@gmail.com
It was written by Dance In The Rain on 7th May 2015 & is intended for educational purposes only.
Supplies:
Scrap Kit: Spring Awakening by Amy Marie's Kits found HERE
Tube: Carla by Chris Pastel found HERE
Font of Choice - I used Follow You Into The World.
Mask: Number 35 by Chrissy's Chaos found HERE
♥ Lets get started ♥
For the Drop Shadow on everything except the tube I am using the following settings:
Vertical: 1
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)
Remember to save everything as you go along in order not to lose it in case of a crash.
DNR means Do Not Resize.
C&P means Copy & Paste.
DS means Drop Shadow.
I am using the following elements frames & Papers:
* Paper 15 - DNR
* Element 59 - Resized to 115%
* Element 63 - Resized to 145%
* Element 83 - Resized to 85%
* Element 8 - DNR
* Element 79 - Resized to 75%
* Element 9 - Resized to 75%
* Element 82 - DNR
* Element 113 - DNR
* Element 115 - DNR
* Element 88 - DNR
* Element 99 - DNR
* Element 29 - Resized to 50%
* Element 64 - Resized to 50%
* Element 65 - Resized to 70%
* Element 11 - Resized to 60%
* Element 95 - Resized to 60%
You can look back at my image for placement of elements.
Open Paper 15 (DNR)
Open Mask in a different window (DNR)
Click on Paper 15 window and go to Layers, New Layer Group, Click ok.
Click on Layers again & New Mask Layer, From Image.
In the source window click on the Mask Layer. Click ok.
C&P Element 59 on to your mask layer.
Resize to 115%. Apply Drop Shadow & Position.
C&P Element 63 on to your image.
Resize to 145%. Position. NO Drop Shadow.
C&P Element 83 on to your image.
Resize to 85%. Position & apply Drop Shadow.
C&P Element 8 on to your image.
DNR. Position & apply Drop Shadow.
C&P Element 79 on to your image.
Resize to 75%. Position & apply Drop Shadow.
C&P Element 9 on to your image.
Resize to 75%. Position & apply Drop Shadow.
C&P Element 82 on to your image.
DNR. Position & apply Drop Shadow.
C&P Element 113 on to your image.
DNR. Position & apply Drop Shadow.
C&P Element 115 on to your image.
DNR. Position & apply Drop Shadow.
C&P Element 88 on to your image.
DNR. Position & apply Drop Shadow.
C&P Element 99 on to your image.
DNR. Position & apply Drop Shadow.
C&P Element 29 on to your image.
Resize to 50%. Position & apply Drop Shadow.
C&P Element 64 on to your image.
Resize to 50%. Position & apply Drop Shadow.
C&P Element 65 on to your image.
Resize to 70%. Position & apply Drop Shadow.
C&P Element11 on to your image.
Resize to 60%. Position & apply Drop Shadow.
C&P Element 95 on to your image.
Resize to 60%. Position & apply Drop Shadow.
C&P your Tube on to your image.
Resize to 60%. Position & Apply Drop Shadow.
Use the following Drop Shadow Settings for the tube & name:
Vertical: 2
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)
We are almost done now.
Add your name. I used font size 18 and color White with an outline color Orange.
I have also applied a Drop Shadow using the TUBE settings.
Add your copyright info, License number & Merge Visible.
Save & you're done. Simply & Easy.
I would love to see what you make using my tutorial.
Thank you for following my Tutorial & I hope you enjoyed it.
If you have any questions please feel free to email me at danceintherain1990@gmail.com
Friday 1 May 2015
**** Amy Marie NSD Sale ****
Starting today (Friday 1st May) Amy Marie is having a MASSIVE NSD Sale. Everything in store is just 74cents. That's right, Scripts, CU, Kits, you name it, she has it and all for 74cents.
Be sure to get in & grab yourself some amazing products at a crazy LOW price!!
This is just some of the Kits on offer right now for 74cents.
**** New CT Tutorial for Amy Marie - Suzy Strawberry & Tiny Turtle Designs Store - Selisan Tube, Suzy ****
Now for the Tutorial
This tutorial is written with the assumption that you have working knowledge of PSP.
It was written by Dance In The Rain on 30th April 2015 & is intended for educational purposes only.
Supplies:
Scrap Kit: Suzy Strawberry by Amy Marie's Kits found HERE
Tube: Suzy by Selisan Al-Gaib found HERE
Font of Choice - I used Sweetheart Script
Mask: Number 8 by Chrissy's Chaos found HERE
♥ Lets get started ♥
For the Drop Shadow on everything except the tube I am using the following settings:
Vertical: 1
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)
Remember to save everything as you go along in order not to lose it in case of a crash.
DNR means Do Not Resize.
C&P means Copy & Paste.
DS means Drop Shadow.
I am using the following elements frames & Papers:
* Paper 20 - DNR
* Element 79 - Resized to 75%
* Element 36 - Resized to 135%
* Element 119 - Resized to 65%
* Element 43 - DNR
* Element 41 - Resized to 55%
* Element 116 - Resized to 45%
* Element 127 - DNR
* Element 21 - Resized to 55%
You can look back at my image for placement of elements.
Open Paper 20 (DNR)
Open Mask in a different window (DNR)
Click on Paper 20 window and go to Layers, New Layer Group, Click ok.
Click on Layers again & New Mask Layer, From Image.
In the source window click on the Mask Layer. Click ok.
C&P Element 79 on to your mask layer.
Resize to 75%. Apply Drop Shadow & Position.
Duplicate Element - Mirror.
C&P Element 36 on to your image.
Resize to 135%. Position. Apply Drop Shadow.
C&P Element 119 on to your image.
Resize to 65%. Position & apply Drop Shadow.
C&P Element 43 on to your image.
DNR. Position & apply Drop Shadow.
C&P Element 41 on to your image.
Resize to 55%. Position & apply Drop Shadow.
Duplicate Element - Mirror.
C&P Element 116 on to your image.
Resize to 45%. Position & apply Drop Shadow.
C&P Element 127 on to your image.
DNR. Position & apply Drop Shadow.
Duplicate Element - Mirror.
C&P Element 21 on to your image.
Resize to 55%. Position & apply Drop Shadow.
C&P your Tube on to your image.
Resize to 75%. Position & Apply Drop Shadow.
Duplicate Tube & Mirror.
You need to do this next bit on both Tube Layers
Go to Effects - Photo Effects - Time Machine.
Use the following settings:
It was written by Dance In The Rain on 30th April 2015 & is intended for educational purposes only.
Supplies:
Scrap Kit: Suzy Strawberry by Amy Marie's Kits found HERE
Tube: Suzy by Selisan Al-Gaib found HERE
Font of Choice - I used Sweetheart Script
Mask: Number 8 by Chrissy's Chaos found HERE
♥ Lets get started ♥
For the Drop Shadow on everything except the tube I am using the following settings:
Vertical: 1
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)
Remember to save everything as you go along in order not to lose it in case of a crash.
DNR means Do Not Resize.
C&P means Copy & Paste.
DS means Drop Shadow.
I am using the following elements frames & Papers:
* Paper 20 - DNR
* Element 79 - Resized to 75%
* Element 36 - Resized to 135%
* Element 119 - Resized to 65%
* Element 43 - DNR
* Element 41 - Resized to 55%
* Element 116 - Resized to 45%
* Element 127 - DNR
* Element 21 - Resized to 55%
You can look back at my image for placement of elements.
Open Paper 20 (DNR)
Open Mask in a different window (DNR)
Click on Paper 20 window and go to Layers, New Layer Group, Click ok.
Click on Layers again & New Mask Layer, From Image.
In the source window click on the Mask Layer. Click ok.
C&P Element 79 on to your mask layer.
Resize to 75%. Apply Drop Shadow & Position.
Duplicate Element - Mirror.
C&P Element 36 on to your image.
Resize to 135%. Position. Apply Drop Shadow.
C&P Element 119 on to your image.
Resize to 65%. Position & apply Drop Shadow.
C&P Element 43 on to your image.
DNR. Position & apply Drop Shadow.
C&P Element 41 on to your image.
Resize to 55%. Position & apply Drop Shadow.
Duplicate Element - Mirror.
C&P Element 116 on to your image.
Resize to 45%. Position & apply Drop Shadow.
C&P Element 127 on to your image.
DNR. Position & apply Drop Shadow.
Duplicate Element - Mirror.
C&P Element 21 on to your image.
Resize to 55%. Position & apply Drop Shadow.
C&P your Tube on to your image.
Resize to 75%. Position & Apply Drop Shadow.
Duplicate Tube & Mirror.
You need to do this next bit on both Tube Layers
Go to Effects - Photo Effects - Time Machine.
Use the following settings:
C&P your Tube on to your image again.
Resize to 50%. Position & Apply Drop Shadow.
Use the following Drop Shadow Settings for the tube & name:
Vertical: 2
Horizontal: 2
Opacity: 100
Blur: 3.00
Color: Black (You can use any color you wish)
We are almost done now.
Add your name. I used font size 20 and color White with an outline color Red.
I have also applied a Drop Shadow using the TUBE settings.
Add your copyright info, License number & Merge Visible.
Save & you're done. Simply & Easy.
I would love to see what you make using my tutorial.
Thank you for following my Tutorial & I hope you enjoyed it.
If you have any questions please feel free to email me at danceintherain1990@gmail.com
Subscribe to:
Posts
(Atom)